Well Water Analysis

We have State of Missouri certified well inspectors, who understand well systems and how contaminants can affect your drinking water quality.
$60 | Water Analysis for Bacteria – This is the most common analysis for homes. We perform a visual inspection of the above ground well components and pressure equipment, and then take a sample of water in a sterile container. The sample should be taken from an exterior cold water valve only. The laboratory then tests the water for a class of enteric bacteria called coliforms. This test takes 24 hours to complete and if no bacteria show, then the sample is considered satisfactory for drinking. However, if bacteria do show, the growth is subjected to an additional 24 hours to determine if it is E. coli bacteria.
$120 | Water Analysis for Chemicals – This test is required for FHA and VA loans and includes taking a sample of water for testing lead, nitrate and nitrite concentrations.
Water tapped by a private well, is often of the highest quality. However, there are many sources of contaminants that can contribute to poor quality conditions. In many cases the homeowner isn’t aware of quality problems because they may increase slowly over time without noticeable change in taste or odor.
When buying a home with a private well, your home inspection should include a well system check up to ensure the well is in good working order and the quality of the water produced meets health standards.
We are familiar with the typical sources of contaminants in the Springfield and South Western Missouri area. Should your well inspection spot a problem we can make recommendations to mitigate contamination.




